SAFETY INFORMATION
..

When using an electrical appliance, basic precautions must always be followed. Read these safety instructions carefully before installing LARS and connecting it to your system and an electrical supply.

DANGER! Always make sure that you only use tubes for which LARS has been configured. If you are uncertain contact your dealer before installing the tubes. If the tubes and the amplifier configuration are not matched, the tubes will be seriously damaged. The amplifiers may also be seriously damaged. Using the wrong set of tubes will void the warranty.

DANGER! Risk of electric shock. Do not remove the top, back and/or the wood cover from the amplifiers. Only authorized service personnel should open the amplifiers for repairs and maintenance work. Not following these safety precautions may be lethal. Any repair and maintenance work carried out by non-authorized ser- vice personnel will void the warranty.

DANGER! The tubes operate at high temperatures and can cause burns if touched! Do not touch the tubes and/ or surrounding areas while the amplifiers are in use and for some time after they have been turned off. Always let the tubes cool down thoroughly and disconnect the power cords before touching or removing the tubes. Always keep the amplifiers out of reach of children and animals.

DANGER! The amplifiers generate much heat! Adequate ventilation must be provided for. Do not place anything on top of and/or too close to the amplifiers that may restrict the airflow through the ventilation.

DANGER! Risk of electric shock! Do not expose the amplifiers to any kind of liquid.

IMPORTANT! Always turn off the amplifiers, disconnect the power cords and let the tubes cool down thoroughly before cleaning or dusting off the outside of the amplifiers.

IMPORTANT! If the amplifiers are moved to a new location, they should be left off for some time in order to ad- just to the temperature in the new environment, before further use of the amplifiers.